{"product_id":"3mm-aluminium-coping-2m-75mm","title":"3mm Aluminium Flat Coping – 2m Length | 75mm External Leg","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 3mm flat coping system is the heavier commercial specification. The size range, 510mm to 1060mm, confirms what this product is designed for: cavity wall commercial construction, wider building envelopes, NHBC-registered new-build housing with insulated parapets, and any commercial project where the structural or architectural specification calls for 3mm gauge rather than the lighter domestic 2mm. The 2m section within that system is the right choice for medium commercial parapet faces, for infill positions in longer runs where the remaining face length falls between 1m and 3m, and for any face where a 3m section would waste more than 1m of made-to-order material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is the 3mm aluminium flat coping in a 2m length with a 75mm external leg. It is part of the commercial flat coping system from Online Metal Store Ltd, distinct from the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/pages\/aluminium-flat-copings\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm flat coping system\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in gauge, size range and bracket specification. Manufactured at the Chelmsford facility, powder coated in any RAL colour, made to order and non-returnable unless faulty.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFlat Coping or Sloping Coping: Which Profile?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth aluminium flat coping and aluminium sloping coping cap a parapet wall and protect it from water ingress. The profile choice depends on the building type, the architectural specification, and the design preference.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Flat Coping (This Product)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe flat top surface gives a clean, horizontal profile at parapet level. This is the standard specification for commercial buildings, office developments, retail units and contemporary residential projects where a minimalist parapet line is part of the design. Flat coping relies on the external leg drip detail and correctly sealed joints for weathertightness rather than a built-in surface slope. The 3mm flat coping system is available in \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-1m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e1m\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, 2m (this product) and \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3m lengths\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the 75mm external leg range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Sloping Coping\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe sloped top surface actively drains rainwater toward the external face. Sloping coping is common on residential flat roof extensions and new-build housing where positive surface drainage is preferred. The 3mm sloping coping equivalent to this product is the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-2m\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm sloping coping 2m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. If the project specification calls for sloping coping rather than flat, use the sloping system throughout: the profiles, corners and stopends are not interchangeable between the flat and sloping systems.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e2mm or 3mm Flat Coping: Choosing the Right Gauge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth gauges are available in the 75mm external leg flat coping range. The profile is the same; the gauge choice is determined by the project type and specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUse 2mm Flat Coping When\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe project is a domestic flat roof extension, garage, boundary wall or outbuilding in a sheltered setting. The parapet wall produces a coping girth below 510mm. Budget is a consideration and 2mm meets the specification. The \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-3m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm flat coping 3m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-2m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm flat coping 2m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the 75mm system cover the domestic and lighter-commercial market.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUse 3mm Flat Coping When\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe project is commercial. The parapet wall width produces a coping girth of 510mm or above. The NHBC or structural specification requires 3mm. The site is exposed or the building is two or more storeys. All components on a 3mm installation must be 3mm gauge: lengths, corners, stopends and the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm coping bracket\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. Do not mix 2mm accessories with 3mm lengths.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eProduct Overview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2m section is part of the 3mm aluminium flat coping system with a 75mm external leg, manufactured at the Online Metal Store Ltd facility in Chelmsford. At 3mm, the profile is stiffer than the 2mm equivalent and resists wind uplift forces more effectively over the service life of a commercial parapet. The flat top surface sits level on the parapet, carrying the drip detail over the 75mm external leg. The internal leg is also 75mm, giving a balanced profile on both faces of the wall. The 23 available width sizes, from 510mm to 1060mm in 25mm increments, cover commercial parapet wall widths from approximately 340mm up to 890mm. The \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm aluminium coping bracket\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is the correct concealed fixing bracket for this 3mm system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2m section sits alongside the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-1m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e1m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the same system. Use 3m sections as the primary lengths for long commercial parapet runs, 2m sections for medium faces and infill, and 1m sections for short faces, final infill pieces and tight-access positions. Every component in the system, including corners, stopends and the bracket, must be 3mm gauge to match.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e3mm Gauge for Commercial Specification\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 3mm, this flat coping section has greater cross-sectional rigidity than the 2mm equivalent. On a commercial building at any meaningful height above ground level, the peel forces generated by wind acting on the coping overhang are higher than at domestic eaves level. The 3mm gauge handles those forces more effectively over the lifespan of the installation. On a commercial project where the coping is expected to perform for 25 years without intervention, specifying 3mm at the outset is the correct long-term decision.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2m Sections for Fewer Joints on Medium Commercial Faces\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn a commercial parapet face between 2m and 5m, the 2m section gives fewer joints than 1m sections and less waste than a 3m section where the face does not divide neatly. A 4m face takes two 2m sections with one joint and no waste. Four 1m sections on the same face give three joints. Joint count on a commercial parapet is not just an aesthetic consideration: every joint is a sealant line, and fewer joints means a simpler maintenance position for the building lifetime.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFlat Profile for Clean Commercial Architectural Lines\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe flat top surface gives a precise horizontal profile at parapet level. This is the correct choice for commercial buildings, contemporary office and retail architecture, and modern residential projects where a clean, uninterrupted parapet line is part of the specification. Unlike sloping coping, there is no visible tilt or angle on the finished profile: the coping sits level and gives a sharp, consistent shadow line along the parapet at any height.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e75mm External Leg, Balanced on Both Faces\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe flat coping system with a 75mm external leg has matching 75mm legs on both sides of the wall. This gives a symmetrical profile with equal overhang on the external and internal faces, which is the standard specification for flat coping on straightforward commercial parapets. The sizing formula for this system is simpler than for sloping coping: wall width + 75mm + 75mm + 10mm + 10mm = wall width + 170mm. For the full range of 3mm flat coping accessories, including corners, stopends and upstand stopends, see the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/collections\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm aluminium flat coping section\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePowder Coated in Any RAL Colour\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe finish is an external grade polyester powder coat available in any RAL colour. On a commercial project where the coping colour is part of the contract specification, ordering the 2m sections alongside the 1m infill sections, 3m primary sections, corners, stopends and brackets in the same RAL ensures all components are coated in the same Chelmsford batch and arrive colour-matched. Anthracite grey (RAL 7016) and white (RAL 9016) are among the most commonly specified colours for commercial flat coping, but any RAL is available to order.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e3mm grade aluminium\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eProfile: \u003c\/strong\u003e\u003cspan\u003eFlat coping length\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e\u003cspan\u003e2m (2000mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExternal Leg: \u003c\/strong\u003e\u003cspan\u003e75mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eInternal Leg: \u003c\/strong\u003e\u003cspan\u003e75mm (equal both sides)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWidth Sizes Available: \u003c\/strong\u003e\u003cspan\u003e510mm, 535mm, 560mm, 585mm, 610mm, 635mm, 660mm, 685mm, 710mm, 735mm, 760mm, 785mm, 810mm, 835mm, 860mm, 885mm, 910mm, 935mm, 960mm, 985mm, 1010mm, 1035mm, 1060mm (23 sizes in 25mm increments)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eWall Width Range Served:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eApproximately 340mm to 890mm (wall width + 170mm = coping size)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eSize Note:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eThe \"size\" refers to the overall WIDTH of the coping profile, not the run length. All sections on this page are 2m long.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSizing Formula: \u003c\/strong\u003e\u003cspan\u003eWall width + 170mm = size to order (75mm external leg + 75mm internal leg + 10mm + 10mm returns = 170mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003ePolyester powder coating, external grade\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eColour: \u003c\/strong\u003e\u003cspan\u003eAny RAL colour to order\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Bracket: \u003c\/strong\u003e\u003cspan\u003e5mm Aluminium Coping Bracket -- NOT the 4mm bracket, which is for 2mm flat coping only\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eFabrication:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eMade to order -- non-returnable unless faulty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCountry of Manufacture: \u003c\/strong\u003e\u003cspan\u003eUnited Kingdom (Chelmsford, Essex)\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCalculating the Width Size: The 3mm Flat Coping Formula\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 23 sizes from 510mm to 1060mm refer to the WIDTH of the coping profile, not the run length. Every section on this page is 2m long. The formula for the 75mm external leg flat coping system is straightforward because both legs are equal:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMeasure the parapet wall width at the top from outside face to inside face.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdd 75mm (external leg) + 75mm (internal leg) + 10mm + 10mm (returns) = 170mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTotal: wall width + 170mm = the size to order. A 340mm wide commercial parapet gives 510mm, the smallest available size. A 440mm wall gives 610mm. A 565mm wall gives 735mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eImportant: \u003c\/span\u003e\u003cspan\u003ethis formula is different from the sloping coping formula. Sloping coping with a 100mm external leg uses wall width + 195mm. Flat coping with 75mm equal legs uses wall width + 170mm. Apply the correct formula for the product you are ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIf the calculated size falls below 510mm, the parapet is likely in the domestic 2mm system range. Verify the specification before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIf the result falls between two sizes, order the next size up.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOn site: measure across the top of an installed section from external leg tip to internal leg tip. That measurement is the size.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow Many 2m Sections Do You Need?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn a commercial parapet, plan each face separately. Work out the total linear metres of each straight face, then choose the most efficient length combination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e4m face: \u003c\/span\u003e\u003cspan\u003etwo 2m sections, one joint, no waste. The most efficient use of the 2m section.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5m face: \u003c\/span\u003e\u003cspan\u003etwo 2m sections plus a 1m cut or a separate 1m section. Two lengths, one joint.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e6m face: \u003c\/span\u003e\u003cspan\u003ethree 2m sections with two joints, or two 3m sections with one joint. The 3m sections are more efficient on a 6m face.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e7m face: \u003c\/span\u003e\u003cspan\u003eone 3m section plus two 2m sections with two joints. More efficient than three 2m sections plus a 1m infill.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMultiple faces: \u003c\/span\u003e\u003cspan\u003eadd up 2m section requirements per face. Corner pieces and stopends do not contribute to run length calculations.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor faces of 3m or more, the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is the more efficient primary section. Use 2m sections for medium faces of 2m to 5m and for infill positions. Use the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-1m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e1m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for short faces and final infill pieces where the remaining length is under 2m.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow to Install 3mm Flat Coping 2m Sections\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMark the bracket positions along the full run before fixing anything. Fix the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm aluminium coping brackets\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e at the correct centres, not exceeding 1000mm, with brackets within 150-200mm of every run terminal, corner junction and stopend position. A 2m section needs a minimum of three brackets: one near each end and at least one intermediate. On exposed sites or elevated commercial buildings, reduce bracket centres to 750mm or as specified by the structural engineer. Confirm all brackets are flat to the wall top before pressing any coping.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePress the 2m flat coping sections onto the brackets from the fixed terminal end of the run. Apply a continuous bead of \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/colour-coded-sealant-300ml\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ecolour coded sealant\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the matching RAL to the internal face of each joint before butting the next section. The sealant bead is the primary weathertight seal at every joint. Keep it continuous.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLock the coping to the brackets using \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/metal-fasteners-ral-pack-25\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ecolour coded metal fasteners\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the matching RAL. Fit the appropriate \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-corner-90\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm 90 degree corner pieces\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e at every change of direction and the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-stopend-75mm-ex\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm closed stopends\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e at every run terminal. Apply a finishing sealant bead on all external joint faces.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhere the 3mm 2m Flat Coping Section Is Used\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCommercial Buildings with Medium Parapet Faces\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn commercial buildings where the perimeter parapet includes faces between 2m and 5m, the 2m section is the natural fit. An office building with a plant room enclosure at 4m wide, a retail unit with a service yard access side parapet of 3.5m, or a stepped parapet detail on a mixed-use development all produce medium-length faces that the 2m section serves well. Used alongside the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3m primary lengths\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for the longer continuous runs, the 2m section handles the geometry of a real commercial building more efficiently than trying to plan everything in 3m increments. The \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/pages\/aluminium-coping-case-study\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ealuminium coping case study\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e shows a completed commercial coping installation on a live UK project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNew-Build Housing Developments with 3mm Specification\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn NHBC-registered residential developments where the house type specification calls for 3mm flat coping on parapet walls, the 2m section handles medium parapet faces within each plot. Volume housebuilders ordering the full system across a development phase, including \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm brackets\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, corners and stopends from the same Chelmsford manufacturer, get colour-matched components and a traceable single-source specification. The \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/pages\/aluminium-coping-case-study\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ealuminium coping case study from London\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e demonstrates the flat coping system at residential project scale.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eExposed Site Parapets Requiring 3mm Specification\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn buildings near the Essex or Kent coast, on hilltop or open-aspect sites, or on any building where the wind loading at parapet level has been assessed and 3mm specified, the 2m flat coping section is the correct infill length within a predominantly 3m installation. Get the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm bracket centres\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e right for the site exposure, seal every joint with \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/colour-coded-sealant-300ml\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ecolour coded sealant\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, and the 3mm flat coping will perform without attention for the life of the building.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCommercial Refurbishment: Like-for-Like Replacement\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen replacing existing 3mm flat coping on a commercial building, the replacement must be 3mm. A 2mm replacement on a 3mm installation produces a visible mismatch and is under-specified for the site conditions that originally required 3mm. The 2m section is the right replacement length for medium parapet faces, alongside the matching \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-corner-90\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm 90 degree corners\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-stopend-75mm-ex\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eclosed stopends\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm brackets\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e from the same Chelmsford manufacturer.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhen should I use 3mm flat coping rather than 2mm?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse 3mm when the project is commercial, when the parapet wall width produces a coping girth of 510mm or above, when the NHBC or structural specification requires 3mm, or when the site is exposed or the building is at two or more storeys. For domestic flat roof extensions, garages and boundary walls in sheltered settings, the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-3m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm flat coping system\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is normally the right choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between flat and sloping aluminium coping?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlat coping has a level top surface that sits horizontally on the parapet. Sloping coping has a built-in slope that tilts toward the external face, actively draining rainwater off the surface. Flat coping is standard on commercial buildings and contemporary architecture where a horizontal parapet profile is specified. Sloping coping is common on residential extensions and new-build housing where positive surface drainage is preferred. The profiles, corners and stopends are not interchangeable between the two systems. For sloping coping in 3mm gauge, see the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-2m\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm sloping coping 2m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat size do I need for my commercial parapet?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWall width + 170mm = the size to order for the 75mm external leg flat coping system. A 340mm wide commercial parapet gives 510mm, the smallest available size. A 440mm wall gives 610mm. A 565mm wall gives 735mm. The 23 sizes refer to coping widths, not run lengths. Every section on this page is 2m long regardless of the size selected.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat bracket do I use with 3mm flat coping?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm aluminium coping bracket\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is the correct bracket for all 3mm flat coping. The 4mm bracket is for 2mm flat coping only. Fix at maximum 1000mm centres with a bracket within 150-200mm of every run end, corner and stopend. For a 2m section, you need a minimum of three brackets. On exposed sites or elevated buildings, reduce to 750mm centres or follow the structural engineer's specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eCan I mix 3mm and 2mm components on the same flat coping installation?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The 2mm and 3mm flat coping profiles have different wall thicknesses. A 2mm corner or stopend on a 3mm run will not produce a flush junction. All components on a 3mm installation must be 3mm gauge throughout: lengths, corners, stopends and upstand stopends. Only the bracket differs by name (5mm for 3mm coping, 4mm for 2mm coping); the profile accessories are system-specific.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eHow many 2m sections do I need for my project?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlan each parapet face separately. For faces of 4m to 5m, two 2m sections give the most efficient result with one joint. For faces of 2m to 4m, one 2m section covers the face with a short cut or a 1m infill piece. For faces over 5m, a \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3m primary section\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e with a 2m or 1m infill usually gives a lower joint count. Add up the 2m section requirements across all faces and order accordingly.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePart of a Complete 3mm Flat Coping System | 75mm External Leg\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2m section is one of three run lengths in the 3mm aluminium flat coping system with a 75mm external leg. A complete installation needs lengths in the right mix, 3mm corner pieces at every change of direction, 3mm stopends at every run terminal, 5mm brackets at the correct centres, sealant at every joint, and metal fasteners on commercial substrates. Order all components from the same Chelmsford manufacturer for matching profiles, consistent colour and a system that fits together. The full 3mm flat coping system with 75mm external leg includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-1m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - 1m Length | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - 2m Length | 75mm External Leg (this product)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - 3m Length | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-corner-90\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - 90 Degree Corner | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-corner-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - 135 Degree Corner | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-stopend-75mm-ex\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - Closed Stopend | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-upstand-75mm-1\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - Stopend Upstand | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-t-junction\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm Aluminium Flat Coping - 90 Degree T-Junction | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/5mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e5mm Aluminium Coping Bracket\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/colour-coded-sealant-300ml\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eColour Coded Sealant 300ml\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/metal-fasteners-ral-pack-25\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eColour Coded Fasteners (Metal)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the full 3mm flat coping range and the 2mm flat coping system, visit the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/pages\/aluminium-flat-copings\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eAluminium Flat Copings collection page\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. For 3mm flat coping delivered as an alternative profile to sloping coping, the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-2m\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm sloping coping 2m length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is the equivalent product in the sloping profile.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStandards and Compliance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium flat coping on commercial flat roof parapets in the UK is specified under \u003c\/span\u003e\u003ca href=\"https:\/\/www.bsigroup.com\/en-GB\/standards\/bs-6229\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBS 6229:2018 - Flat Roofs with Continuously Supported Flexible Waterproof Coverings\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. The standard covers parapet and edge detailing for flat roofs, including coping specification, joint treatment and fixing requirements. A 3mm aluminium flat coping system with 5mm brackets at the correct centres, sealant-bedded joints and correctly specified accessories throughout is consistent with the weathertight parapet requirements of this standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe external grade polyester powder coat applied to all 3mm flat coping components from Online Metal Store Ltd meets the requirements of \u003c\/span\u003e\u003ca href=\"https:\/\/www.bsigroup.com\/en-GB\/standards\/bs-en-12206-1\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBS EN 12206-1 - Organic Coatings on Aluminium and Aluminium Alloys\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. On a commercial project where the coping specification forms part of a contract document, this standard provides a documented performance basis for the coating across every component in the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor NHBC-registered new-build projects, Chapter 7.1 of the NHBC Standards covers parapet wall and flat roof construction. A 3mm aluminium flat coping system, correctly sized and installed with 5mm brackets and sealant-bedded joints, is consistent with the parapet detailing requirements for new-build completions where 3mm flat coping is the specified configuration.\u003c\/span\u003e\u003c\/p\u003e","brand":"Online Metal Store Ltd","offers":[{"title":"510mm","offer_id":42314541105236,"sku":"AC3-2M-75-510","price":118.8,"currency_code":"GBP","in_stock":true},{"title":"535mm","offer_id":42314541138004,"sku":"AC3-2M-75-535","price":124.34,"currency_code":"GBP","in_stock":true},{"title":"560mm","offer_id":42314541170772,"sku":"AC3-2M-75-560","price":129.89,"currency_code":"GBP","in_stock":true},{"title":"585mm","offer_id":42314541203540,"sku":"AC3-2M-75-585","price":135.43,"currency_code":"GBP","in_stock":true},{"title":"610mm","offer_id":42314541236308,"sku":"AC3-2M-75-610","price":140.98,"currency_code":"GBP","in_stock":true},{"title":"635mm","offer_id":42314541269076,"sku":"AC3-2M-75-635","price":146.52,"currency_code":"GBP","in_stock":true},{"title":"660mm","offer_id":42314541301844,"sku":"AC3-2M-75-660","price":152.06,"currency_code":"GBP","in_stock":true},{"title":"685mm","offer_id":42314541334612,"sku":"AC3-2M-75-685","price":157.61,"currency_code":"GBP","in_stock":true},{"title":"710mm","offer_id":42314541367380,"sku":"AC3-2M-75-710","price":163.15,"currency_code":"GBP","in_stock":true},{"title":"735mm","offer_id":42314541400148,"sku":"AC3-2M-75-735","price":168.7,"currency_code":"GBP","in_stock":true},{"title":"760mm","offer_id":42314541432916,"sku":"AC3-2M-75-760","price":174.24,"currency_code":"GBP","in_stock":true},{"title":"785mm","offer_id":42314541465684,"sku":"AC3-2M-75-785","price":179.78,"currency_code":"GBP","in_stock":true},{"title":"810mm","offer_id":42314541498452,"sku":"AC3-2M-75-810","price":185.33,"currency_code":"GBP","in_stock":true},{"title":"835mm","offer_id":42314541531220,"sku":"AC3-2M-75-835","price":190.87,"currency_code":"GBP","in_stock":true},{"title":"860mm","offer_id":42314541563988,"sku":"AC3-2M-75-860","price":196.42,"currency_code":"GBP","in_stock":true},{"title":"885mm","offer_id":42314541596756,"sku":"AC3-2M-75-885","price":201.96,"currency_code":"GBP","in_stock":true},{"title":"910mm","offer_id":42314541629524,"sku":"AC3-2M-75-910","price":207.5,"currency_code":"GBP","in_stock":true},{"title":"935mm","offer_id":42314541662292,"sku":"AC3-2M-75-935","price":213.05,"currency_code":"GBP","in_stock":true},{"title":"960mm","offer_id":42314541695060,"sku":"AC3-2M-75-960","price":218.59,"currency_code":"GBP","in_stock":true},{"title":"985mm","offer_id":42314541727828,"sku":"AC3-2M-75-985","price":224.14,"currency_code":"GBP","in_stock":true},{"title":"1010mm","offer_id":42314541760596,"sku":"AC3-2M-75-1010","price":229.68,"currency_code":"GBP","in_stock":true},{"title":"1035mm","offer_id":42314541793364,"sku":"AC3-2M-75-1035","price":235.22,"currency_code":"GBP","in_stock":true},{"title":"1060mm","offer_id":42314541826132,"sku":"AC3-2M-75-1060","price":240.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/1588\/2580\/files\/aluminium-flat-coping-2m-length.png?v=1774517115","url":"https:\/\/onlinemetalstore.co.uk\/products\/3mm-aluminium-coping-2m-75mm","provider":"Online Metal Store Ltd","version":"1.0","type":"link"}