{"product_id":"aluminium-coping-stopend-75mm","title":"2mm Aluminium Flat Coping – Closed Stopend | 75mm External Leg","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe corner pieces get the attention, but the stopend is just as critical to a weathertight parapet. A flat coping run has to terminate somewhere, whether that is at a wall end, at a junction with a building face, or at the transition between a coping run and a different building element. Leave that end open and you have a channel that collects water, feeds it back under the coping, and directs it straight into the wall construction below. It is one of those details that gets missed in a hurry and then causes a damp problem that takes months to track down.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2mm aluminium flat coping closed stopend caps the end of a \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-3m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm flat coping run\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e with a pre-formed, weathertight closure. It is available in 29 sizes from 185mm to 885mm to match virtually any parapet wall width, and it is powder coated in any RAL colour to match the rest of the coping system. Manufactured in Chelmsford, Essex, it is the final component that makes a flat coping installation complete.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eProduct Overview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe closed stopend is the terminal component for a flat coping run. Once the straight lengths are fixed along the parapet and the corners are in place, the stopend caps each open end of the run and seals it against water entry. The \"closed\" designation means the end face is fully sealed: the profile wraps over the top of the wall and closes off the open end of the coping entirely, with no gap for water to enter. This distinguishes it from the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-upstand-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003estopend upstand\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, which has an upstand that allows water drainage at the end of the run rather than a sealed closure. For most flat coping runs on a flat roof parapet, the closed stopend is the correct terminal piece at both ends of each run unless drainage off the end of the coping is specifically required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stopend is part of the Online Metal Store Ltd 2mm aluminium flat coping range with a 75mm external leg. It is fabricated to order in the size you select, with 29 sizes available to cover wall widths from approximately 15mm up to around 715mm depending on how the coping is detailed. All sizes are powder coated using an external grade polyester finish in any RAL colour, matching the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-3m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eflat coping lengths\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-corner-90-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e90 degree corners\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-corner-135\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e135 degree corners\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and brackets ordered for the same project.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFully Sealed End Detail\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe closed design seals the open end of the coping profile completely. The end face, the top surface and the external leg are all formed from a single fabricated piece with no open seams at the terminal point. Once fitted and sealed with sealant at the joint to the straight length, the end of the coping run is as weathertight as the rest of the system. There is no exposed edge, no gap at the end cap, and no path for wind-driven rain to enter the wall at the coping termination.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e29 Sizes to Match Any Wall Width\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvailable in 29 sizes from 185mm to 885mm in 25mm increments, this stopend covers virtually every parapet wall width you are likely to encounter on a UK flat roof project. The size you order should match the overall width of the flat coping profile on your parapet. That is the wall width plus the external legs on both sides plus the returns. The size guide below explains how to calculate this for your project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eExact Colour Match Across the Full System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause this stopend is ordered alongside the rest of the coping system and fabricated in the same batch, the powder coat finish will be an exact match to the lengths, corners and brackets in the same order. On a visible parapet, a stopend in a slightly different shade or sheen from the rest of the coping stands out. Ordering everything together from the same manufacturer in Chelmsford eliminates that risk completely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePowder Coated, Not Anodised\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll products in the 2mm flat coping range, including this stopend, are finished with an external grade polyester powder coating. This is the correct and accurate description of the finish process. Powder coating bonds a durable, coloured coating directly to the prepared aluminium surface and is available in any RAL colour. It is a different process from anodising and provides a broader range of colour options with excellent durability in exposed external conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFabricated in Chelmsford, Essex\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stopend is a custom-fabricated item made to your selected size at the Online Metal Store Ltd facility in Chelmsford. Because it is made in the UK to order, lead times are short and the size range is not limited to a handful of stock profiles. If your wall width falls between standard sizes, pick the next size up and discuss the detail with Online Metal Store Ltd. The UK manufacturing base means fast turnaround for projects across Essex, the South East and the wider UK.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaterial: \u003c\/strong\u003e\u003cspan\u003e2mm grade aluminium\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eProfile: \u003c\/strong\u003e\u003cspan\u003eFlat coping closed stopend\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eExternal Leg:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e75mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAvailable Sizes: \u003c\/strong\u003e\u003cspan\u003e185mm, 210mm, 235mm, 260mm, 285mm, 310mm, 335mm, 360mm, 385mm, 410mm, 435mm, 460mm, 485mm, 510mm, 535mm, 560mm, 585mm, 610mm, 635mm, 660mm, 685mm, 710mm, 735mm, 760mm, 785mm, 810mm, 835mm, 860mm, 885mm (29 sizes in 25mm increments)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFinish: \u003c\/strong\u003e\u003cspan\u003ePolyester powder coating, external grade\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eColour: \u003c\/strong\u003e\u003cspan\u003eAny RAL colour to order\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eType:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eClosed (fully sealed end face)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eCompatible System:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e2mm Aluminium Flat Coping range | 75mm External Leg\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eFabrication:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eMade to order - non-returnable unless faulty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eUnited Kingdom (Chelmsford, Essex)\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Measure for the Right Stopend Size\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stopend size should match the overall width of the flat coping profile on your parapet, not the wall width alone. Here is how to work out the correct size:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStep 1: Measure the width of the parapet wall at the top, from the outside face to the inside face. This is your wall width.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStep 2: Add the two external leg dimensions. For a 75mm external leg coping, both legs are 75mm. Add 75mm + 75mm = 150mm to the wall width.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStep 3: Add the two returns. The flat coping profile includes a small return lip on each side, typically 10mm each side. Add 10mm + 10mm = 20mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStep 4: The total is your overall coping girth: wall width + 150mm + 20mm = wall width + 170mm. For example, a 215mm wide wall gives a coping girth of 385mm. Select the 385mm stopend from the size list.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStep 5: If your calculated girth falls between two available sizes, select the next size up. A stopend that is very slightly oversized can be trimmed on site; one that is undersized will not seat correctly on the coping profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTip: if you already have a straight coping length on site, measure its overall width across the top including both legs and both returns. That measurement is your stopend size.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eClosed Stopend or Stopend Upstand: Which Do You Need?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth products terminate the end of a flat coping run, but they do it differently. The closed stopend seals the end face completely. It is the right choice wherever the coping run ends at a wall termination, an abutment with a building face, or a parapet corner where the end of the run is simply closed off. The \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-upstand-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003estopend upstand\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e has an upstand at the end of the coping that allows water to drain up and over the end rather than being fully sealed. It is used where the coping run ends at a higher point and drainage off the end of the run is part of the design detail, or where a post or upstand element needs to pass through the coping termination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the majority of flat roof parapet installations, including domestic extensions, garages, commercial flat roofs and boundary walls, the closed stopend is the correct choice at both ends of every straight coping run. Use the upstand version only where the design specifically requires an open or drained end detail.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow to Fit a Flat Coping Closed Stopend\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFix the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/4mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ealuminium coping brackets\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e along the full parapet run first, including a bracket positioned close to each end of the run to give the stopend solid bearing. The bracket at the end of the run should sit far enough back from the wall termination to allow the stopend to seat fully over the end of the final straight length without the bracket fouling the stopend profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce the straight coping lengths are in position, offer the stopend up to the open end of the final length and check the fit. The stopend should slide over the end of the coping profile and sit flush with the outer face of the straight length. Apply a continuous bead of \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/colour-coded-sealant-300ml\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ecolour coded sealant\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e around the inside face of the stopend before pressing it into its final position. The sealant bead seals the joint between the stopend and the straight length on all three sides of the profile. Do not skip this step: the sealant is the only thing preventing water from tracking back through the butt joint between the stopend and the coping run.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce the stopend is seated and the sealant bead is in place, secure the assembly using \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/timber-fasteners-ral\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ecolour coded fasteners\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the matching RAL colour. Fix through the top of the coping where the bracket bears, keeping fixings in line with the bracket positions so they are supported. Apply a finishing bead of sealant to the external joint line where the stopend meets the straight length for a clean, weathertight termination.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhere the Flat Coping Closed Stopend Is Used\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDomestic Flat Roof Extensions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery flat roof extension with a parapet needs a stopend at each end of every coping run. On a standard rectangular rear extension, there are typically four straight runs and up to eight stopend positions depending on the layout. The \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/collections\/2mm-aluminium-flat-coping\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm flat coping system\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is the most common choice for domestic work across Essex, East London and the South East, and the closed stopend is the standard terminal piece for this application. Ordering the stopends at the same time as the lengths, corners and brackets ensures everything arrives colour-matched in a single delivery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFlat-Roofed Garages and Outbuildings\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGarages and outbuildings with flat roofs are a significant proportion of the domestic coping market. A detached or integral garage with a parapet wall on three or four sides will typically have four straight coping runs, each needing a closed stopend at both ends. On a garage or outbuilding where the coping is less visible from street level, the temptation is to skip the stopends or bodge the end detail. That is a mistake: water ingress at an open coping end causes damp in the wall below that can take years to manifest visibly and is expensive to fix.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCommercial and New-Build Parapets\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCommercial flat roof parapets on office buildings, retail units and light industrial units across the South East commonly use aluminium flat coping as the parapet cap. On a commercial project, all system components are specified together, and the stopends are ordered as part of the full coping system from the same manufacturer. Housebuilders on NHBC-registered new-build developments will typically order the full system, including stopends, from the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/pages\/aluminium-flat-copings\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ealuminium flat copings range\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, to ensure colour and profile consistency across all plots on a development.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBoundary Walls and Landscaping Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium flat coping is increasingly used on low boundary walls, screen walls and raised planting beds where a clean, low-maintenance cap is required. On a boundary wall with a defined end, the closed stopend provides the neat sealed termination that makes the wall look finished rather than simply cut off. It works alongside the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-corner-90-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e90 degree corner\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-corner-135\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e135 degree corner\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e to complete the full perimeter coping on a landscaping structure where multiple directions and terminations are required.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat does a flat coping stopend actually do?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt seals the open end of a flat coping run. When a flat coping system is installed along a parapet wall, the straight lengths leave an open profile at each end of the run. Without a stopend, that open end is a gap where wind-driven rain can enter the coping profile and track back into the wall or the flat roof build-up below. The closed stopend caps that end completely, creating a sealed termination that is weathertight on all sides. It is fitted at both ends of every open coping run as the final component in the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eHow do I work out what size stopend I need?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the overall width of the flat coping profile you are using, which is the wall width plus both external legs plus both returns. For a 75mm external leg flat coping, that is wall width plus 170mm (75mm + 75mm + 10mm + 10mm). A wall that is 215mm wide gives an overall coping girth of 385mm, so you would order the 385mm stopend. If your figure falls between two available sizes, order the next size up. The size range runs from 185mm to 885mm in 25mm steps, covering wall widths from approximately 15mm up to around 715mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between a closed stopend and a stopend upstand?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA closed stopend seals the end of the coping run completely. The end face is formed as a solid closure with no opening. A stopend upstand has an upstand element at the end of the coping that allows water to drain up and over rather than being fully sealed in. The upstand version is used where drainage off the end of a coping run is required by the design, or where a structural element needs to pass through the coping termination. For most domestic and commercial flat roof parapet installations, the closed stopend is the correct choice. Use the upstand only where the design specifically calls for it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eIs this stopend powder coated or anodised?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is powder coated. All products in the 2mm flat coping range, including this stopend, are finished with an external grade polyester powder coating. The powder coat is available in any RAL colour and provides excellent durability in UK external conditions. These products are not anodised. Anodising and powder coating are two different finishing processes: powder coating applies a coloured protective layer to the surface, while anodising is an electrochemical process that hardens the oxide layer on the aluminium. The finish on this product is powder coating only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eCan I return this stopend if I order the wrong size?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a custom-fabricated item made to your selected size and RAL colour. As with all made-to-order products, it is non-returnable unless it arrives faulty or materially different from what was ordered. This is why the size guide above is important: take the time to measure the overall coping girth correctly before placing the order. If you are unsure of the size you need, contact Online Metal Store Ltd before ordering and the team will help you confirm the correct size based on your wall width.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePart of a Complete Flat Coping System\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stopend is one component in the complete 2mm aluminium flat coping system with a 75mm external leg. A flat roof parapet needs lengths, corners, stopends and brackets from the same range to ensure consistent profiles, matching colours and a fully weathertight perimeter. The full 2mm flat coping system with 75mm external leg includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-1m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping - 1m Length | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-2m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping - 2m Length | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-3m-75mm-leg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping - 3m Length | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-corner-90-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping 90 Degree Corner | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/2mm-aluminium-coping-corner-135\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping 135 Degree Corner | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping - Closed Stopend | 75mm External Leg (this product)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-upstand-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping - Stopend Upstand | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-cooping-junction-75mm\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e2mm Aluminium Flat Coping - 90 Degree T-Junction | 75mm External Leg\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/4mm-aluminium-coping-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eAluminium Coping Bracket\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/colour-coded-sealant-300ml\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eColour Coded Sealant 300ml\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/timber-fasteners-ral\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eColour Coded Fasteners (Timber)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the full range overview, visit the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/pages\/aluminium-flat-copings\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eAluminium Flat Copings collection page\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. If you are working with 3mm coping, the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-stopend-75mm-ex\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e3mm flat coping closed stopend\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is the correct terminal piece for the heavier gauge system.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStandards and Compliance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlat roof parapet coping systems in the UK are detailed in accordance with \u003c\/span\u003e\u003ca href=\"https:\/\/www.bsigroup.com\/en-GB\/standards\/bs-6229\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBS 6229:2018 - Flat Roofs with Continuously Supported Flexible Waterproof Coverings\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. This standard covers parapet and edge detailing for flat roofs and includes requirements for coping system terminations. A properly fitted and sealed closed stopend at the end of each coping run is part of a complete and compliant parapet detail under this standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe powder coat finish on all Online Metal Store Ltd aluminium flat coping components, including this stopend, is applied in accordance with \u003c\/span\u003e\u003ca href=\"https:\/\/www.bsigroup.com\/en-GB\/standards\/bs-en-12206-1\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBS EN 12206-1 - Organic Coatings on Aluminium and Aluminium Alloys\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. This is the performance standard for external-grade powder coatings on aluminium. Every component in the range, from the lengths to the corners to the stopends, is coated to the same specification, which means the colour, gloss and durability characteristics are consistent across the full installed system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor NHBC-registered new-build projects, Chapter 7.1 of the NHBC Standards sets out parapet wall and flat roof construction requirements. A fully detailed aluminium flat coping system with properly fitted stopends at every run termination is consistent with these requirements and supports the new-build warranty position.\u003c\/span\u003e\u003c\/p\u003e","brand":"Online Metal Store","offers":[{"title":"185mm","offer_id":42314563059796,"sku":"AC2-CS-75-185","price":57.6,"currency_code":"GBP","in_stock":true},{"title":"210mm","offer_id":42314563092564,"sku":"AC2-CS-75-210","price":58.56,"currency_code":"GBP","in_stock":true},{"title":"235mm","offer_id":42314563125332,"sku":"AC2-CS-75-235","price":59.52,"currency_code":"GBP","in_stock":true},{"title":"260mm","offer_id":42314563158100,"sku":"AC2-CS-75-260","price":60.48,"currency_code":"GBP","in_stock":true},{"title":"285mm","offer_id":42314563190868,"sku":"AC2-CS-75-285","price":61.44,"currency_code":"GBP","in_stock":true},{"title":"310mm","offer_id":42314563223636,"sku":"AC2-CS-75-310","price":62.4,"currency_code":"GBP","in_stock":true},{"title":"335mm","offer_id":42314563256404,"sku":"AC2-CS-75-335","price":63.36,"currency_code":"GBP","in_stock":true},{"title":"360mm","offer_id":42314563289172,"sku":"AC2-CS-75-360","price":64.32,"currency_code":"GBP","in_stock":true},{"title":"385mm","offer_id":42314563321940,"sku":"AC2-CS-75-385","price":65.28,"currency_code":"GBP","in_stock":true},{"title":"410mm","offer_id":42314563354708,"sku":"AC2-CS-75-410","price":66.24,"currency_code":"GBP","in_stock":true},{"title":"435mm","offer_id":42314563387476,"sku":"AC2-CS-75-435","price":67.2,"currency_code":"GBP","in_stock":true},{"title":"460mm","offer_id":42314563420244,"sku":"AC2-CS-75-460","price":68.16,"currency_code":"GBP","in_stock":true},{"title":"485mm","offer_id":42314563453012,"sku":"AC2-CS-75-485","price":69.12,"currency_code":"GBP","in_stock":true},{"title":"510mm","offer_id":42314563485780,"sku":"AC2-CS-75-510","price":70.08,"currency_code":"GBP","in_stock":true},{"title":"535mm","offer_id":42314563518548,"sku":"AC2-CS-75-535","price":71.04,"currency_code":"GBP","in_stock":true},{"title":"560mm","offer_id":42314563551316,"sku":"AC2-CS-75-560","price":72.0,"currency_code":"GBP","in_stock":true},{"title":"585mm","offer_id":42314563584084,"sku":"AC2-CS-75-585","price":72.96,"currency_code":"GBP","in_stock":true},{"title":"610mm","offer_id":42314563616852,"sku":"AC2-CS-75-610","price":73.92,"currency_code":"GBP","in_stock":true},{"title":"635mm","offer_id":42314563649620,"sku":"AC2-CS-75-635","price":74.88,"currency_code":"GBP","in_stock":true},{"title":"660mm","offer_id":42314563682388,"sku":"AC2-CS-75-660","price":75.84,"currency_code":"GBP","in_stock":true},{"title":"685mm","offer_id":42314563715156,"sku":"AC2-CS-75-685","price":76.8,"currency_code":"GBP","in_stock":true},{"title":"710mm","offer_id":42314563747924,"sku":"AC2-CS-75-710","price":77.76,"currency_code":"GBP","in_stock":true},{"title":"735mm","offer_id":42314563780692,"sku":"AC2-CS-75-735","price":78.72,"currency_code":"GBP","in_stock":true},{"title":"760mm","offer_id":42314563813460,"sku":"AC2-CS-75-760","price":79.68,"currency_code":"GBP","in_stock":true},{"title":"785mm","offer_id":42314563846228,"sku":"AC2-CS-75-785","price":80.64,"currency_code":"GBP","in_stock":true},{"title":"810mm","offer_id":42314563878996,"sku":"AC2-CS-75-810","price":81.6,"currency_code":"GBP","in_stock":true},{"title":"835mm","offer_id":42314563911764,"sku":"AC2-CS-75-835","price":82.56,"currency_code":"GBP","in_stock":true},{"title":"860mm","offer_id":42314563944532,"sku":"AC2-CS-75-860","price":83.52,"currency_code":"GBP","in_stock":true},{"title":"885mm","offer_id":42314563977300,"sku":"AC2-CS-75-885","price":84.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/1588\/2580\/files\/roof-coping-stopend-aluminium-flat.jpg?v=1774517147","url":"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-coping-stopend-75mm","provider":"Online Metal Store Ltd","version":"1.0","type":"link"}