{"product_id":"aluminium-downpipe-extender","title":"Aluminium Round Downpipe - Spigot Extender","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeep fascia boards cause a headache that every roofer and installer across Essex and the South East knows well. The gutter outlet drops through the soffit, but the spigot does not extend far enough below the fascia for the first downpipe length or offset bend to connect cleanly. You end up with a gap, a bodged joint, or a pipe that sits at an angle because there is nothing to grip onto. On new builds around Chelmsford, Brentwood and Basildon, where deeper fascia profiles are increasingly common, this is a problem that comes up on site after site.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe spigot extender is the purpose built solution. It pushes onto the gutter outlet spigot and extends it downward, giving you a proper connection point below the fascia line. No improvising with offcuts, no forcing joints, no relying on sealant alone to hold a connection that should be mechanical. It is a small fitting that prevents a whole chain of problems further down the run.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eProduct Overview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium round downpipe spigot extender from \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eOnline Metal Store Ltd\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e is a short pipe section that slides over a gutter outlet spigot to extend it past a deep fascia board. Once in place, the extended spigot provides a secure connection point for the first \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-3m-plain\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003edownpipe length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-fitting-adjust\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eoffset\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-bend\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ebend\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e in the run. Available in 76mm and 100mm diameters, each extender is custom fabricated at our Chelmsford, Essex workshop and powder coated in any RAL colour to match your full rainwater system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe extender is particularly useful on properties with deep soffits, oversized fascia boards, or where the gutter outlet sits recessed behind cladding. Rather than trying to make a standard fitting work in a space it was not designed for, the extender bridges the gap cleanly and keeps the entire downpipe run properly aligned.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSolves Deep Fascia Connection Problems\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere a standard gutter outlet spigot is too short to reach past the fascia, the extender adds the length needed for a proper mechanical connection. It eliminates the gap between the outlet and the first fitting, keeping joints tight and water flow uninterrupted.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCorrosion Resistant for All UK Conditions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium does not rust. Combined with a polyester powder coat finish, the extender withstands driving rain, frost cycles, coastal salt air and the prolonged damp that buildings across Essex, Kent and the Home Counties deal with year round.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePowder Coated in Any RAL Colour\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery extender is colour matched to your gutter and downpipe system before dispatch. Whether you are working with Anthracite Grey RAL 7016, Black RAL 9005 or a bespoke heritage colour, the finish is consistent across every component in the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLightweight and Quick to Fit\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe extender pushes onto the gutter outlet spigot without specialist tools. At a fraction of the weight of a cast iron equivalent, it is easy to handle when working at height on a ladder or scaffolding.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUK Manufactured with Fast Turnaround\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery extender is fabricated at our workshop in Chelmsford, Essex. Because we manufacture to order, quality is controlled from start to finish and lead times are kept short. Most orders leave within a few working days.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAluminium\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eType:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eRound downpipe spigot extender\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAvailable Sizes: \u003c\/strong\u003e\u003cspan\u003e76mm diameter, 100mm diameter\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFinish: \u003c\/strong\u003e\u003cspan\u003ePolyester powder coated in any RAL colour\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eManufactured:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eChelmsford, Essex, United Kingdom\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eCustom Fabricated:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eYes, made to selected size and finish\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eNon-returnable unless faulty (custom fabricated item)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003ePrice:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eFrom £86.25 ex. VAT (£103.50 inc. VAT)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChoosing the Right Size\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe extender diameter must match both the gutter outlet and the downpipe system it connects to. There are two options:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e76mm: \u003c\/span\u003e\u003cspan\u003eFits 76mm round gutter outlets and connects to the 76mm round downpipe system. This is the standard size for most domestic properties, single storey extensions and smaller commercial buildings.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e100mm: \u003c\/span\u003e\u003cspan\u003eFits 100mm round gutter outlets and connects to the 100mm round downpipe system. Used on larger roof areas, commercial units, schools and buildings with higher rainfall volume.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are unsure which size you need, check the diameter of your gutter outlet or your existing downpipe. The outlet diameter determines the full system size.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow to Fit a Downpipe Spigot Extender\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStart by confirming that the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-gutter-outlet\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003egutter outlet\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e spigot is not long enough to clear the fascia board on its own. If the spigot ends above or behind the fascia line and there is not enough exposed length for a downpipe or fitting to connect, a spigot extender is needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSlide the extender over the outlet spigot until it sits firmly. Apply a bead of \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/colour-coded-sealant-300ml\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ecolour coded sealant\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e around the joint for a watertight, colour matched seal. The extended spigot should now project below the fascia line, giving you a clean connection point for the first \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-3m-plain\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003edownpipe length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-fitting-adjust\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eadjustable offset\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSecure the first pipe section with a \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-pipe-clip\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003estandard pipe clip\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-clip\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eadjustable pipe clip\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e directly below the extender to take the weight of the downpipe run and keep everything aligned against the wall.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhere Downpipe Spigot Extenders Are Used\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNew Builds with Deep Fascia Profiles\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eModern housing developments across Chelmsford, Colchester, Braintree and the wider South East increasingly use deep fascia boards for a contemporary roofline appearance. These deeper profiles often leave the standard gutter outlet spigot too short to connect to the downpipe below. The extender bridges the gap without compromising the system or the look of the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDomestic Extensions and Refurbishments\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen a homeowner replaces plastic guttering with aluminium on an existing property, the fascia depth may not match the new system perfectly. The extender provides the flexibility to make the transition work cleanly, especially on properties where the soffit and fascia have been upgraded to deeper aluminium profiles at the same time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCommercial and Industrial Installations\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn commercial buildings, warehouses and retail units, the fascia and cladding detail is often deeper than on domestic properties. The 100mm spigot extender pairs with the \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-3m-plain\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003e100mm round downpipe system\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e to handle larger roof areas and higher flow rates while keeping the outlet to pipe connection tight and secure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eListed Buildings and Conservation Areas\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePeriod properties with decorative cornicing or deep original fascia boards sometimes need the extra reach that a spigot extender provides. Powder coated in a heritage RAL colour, the extender blends into the roofline without visible bodges or misaligned joints that conservation officers would flag.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat is a downpipe spigot extender used for?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA spigot extender is a short aluminium pipe section that slides over a gutter outlet spigot to extend it past a deep fascia board. It provides a longer connection point below the fascia so that the first downpipe length, offset or bend can connect properly. Without it, you are left with a gap or a weak joint that relies on sealant alone.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eDo I need a spigot extender for a deep fascia board?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf the gutter outlet spigot does not project far enough below the fascia for the downpipe or first fitting to connect mechanically, then yes. This is common on modern new builds with deep fascia profiles, on properties where the fascia has been upgraded, or on any building where the soffit depth is greater than the standard outlet spigot length.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between a spigot extender and a downpipe joiner?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-joiner\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003edownpipe joiner\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e connects two lengths of downpipe together within the run. A spigot extender sits at the very top of the system, extending the gutter outlet spigot itself. They solve different problems at different points in the pipe run. If you need to join two pipe lengths, use a joiner. If you need to extend the outlet past the fascia, use a spigot extender.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eWhat size spigot extender do I need?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMatch the extender to your gutter outlet diameter. This product is available in 76mm and 100mm. The 76mm is the standard for most domestic and smaller commercial installations. The 100mm is for larger roof areas and higher volume systems. Check the outlet size on your gutter before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eCan I get the extender colour matched to my guttering?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Every extender is powder coated in any RAL colour before dispatch. Order it in the same RAL code as your gutter, downpipe and fittings for a fully colour matched system from outlet to ground.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSpigot Extender vs Improvised Solutions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePurpose Built Spigot Extender\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA factory fabricated extender provides a consistent diameter, a proper interference fit on the outlet spigot, and a powder coated finish that matches the rest of the system. It is designed specifically for this job and gives a reliable, repeatable connection every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCut Down Pipe Offcut\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSome installers cut a short section of downpipe and force it over the outlet spigot as a makeshift extender. The fit is rarely tight enough, the cut end is unfinished, and the connection depends entirely on sealant. Over time, thermal movement and wind loading can work the joint loose, leading to leaks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePlastic Adaptor\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlastic adaptors are available from some suppliers, but mixing plastic and aluminium in the same system creates colour mismatch, different expansion rates and a visible join. For a clean, long lasting connection that matches the rest of the rainwater system, an aluminium spigot extender is the right choice. Browse the full \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/collections\/round-downpipe\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eround downpipe collection\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e to see all the fittings available.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePart of a Complete Round Downpipe System\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe spigot extender sits at the very top of the downpipe run, connecting the gutter outlet to everything below. Ordering every component from a single supplier means consistent colour, consistent profile and no compatibility problems on site. The complete round downpipe range includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-3m-plain\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eRound Downpipe 3m Length\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – the main pipe run\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-clip\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eAdjustable Pipe Clip\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – for walls with uneven surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-pipe-clip\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eStandard Pipe Clip\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – fixed wall bracket\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-joiner\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eInternal Joiner\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – connects two pipe lengths\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-bend\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBend\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – changes pipe direction\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-shoe\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eShoe\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – ground level discharge fitting\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-fitting-adjust\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eAdjustable Offset\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – bridges the gap between outlet and wall\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-round-downpipe-branch\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBranch\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – merges two pipe runs into one\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/round-downpipe-access-panel\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eAccess Panel\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e – inspection and cleaning access\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the gutter side of the system, see the full \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/collections\/half-round-gutter\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ehalf round gutter collection\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e including \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-gutter-3m\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003egutter 3m lengths\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-gutter-outlet\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003egutter round outlets\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-gutter-bracket\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003erafter brackets\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/onlinemetalstore.co.uk\/products\/gutter-union-joiner\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eunion joiners\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStandards and Compliance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium rainwater downpipe fittings fall under \u003c\/span\u003e\u003ca href=\"https:\/\/www.bsigroup.com\/en-GB\/standards\/bs-en-612\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBS EN 612\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e which covers eaves gutters and rainwater downpipes. The powder coat finish is applied in line with \u003c\/span\u003e\u003ca href=\"https:\/\/www.bsigroup.com\/en-GB\/standards\/bs-en-12206-1\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eBS EN 12206-1\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for powder organic coatings on aluminium. On NHBC registered new build projects, the rainwater system should meet the requirements of Chapter 7.1 (drainage) and Chapter 7.2 (roofing). Getting this right protects the warranty, the building and the people inside it.\u003c\/span\u003e\u003c\/p\u003e","brand":"Online Metal Store Ltd","offers":[{"title":"76mm","offer_id":42317789167700,"sku":"ARD-SPE-76","price":86.25,"currency_code":"GBP","in_stock":true},{"title":"100mm","offer_id":42317789200468,"sku":"ARD-SPE-100","price":86.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/1588\/2580\/files\/AluminiumRoundDownpipe_SpigotExtender.png?v=1774517194","url":"https:\/\/onlinemetalstore.co.uk\/products\/aluminium-downpipe-extender","provider":"Online Metal Store Ltd","version":"1.0","type":"link"}